E2E tests are conducted as the last step in this implementation and configuration phase. This ensures that the web services implemented can communicate properly with the HBS.
You will conduct the first four test cases (and any optional additional ones you wish to conduct) on your own, these look as follows:
Test cases one and two have to be done using an RFID card.
It is your choice to decide whether you prefer to complete test case one using Classic RFID or test case two RFID DesFire.
We offer the Virtual Charging Point for testing purposes - please read more about using it here. Please record your results in the End-to-End Test Protocol attached at the bottom of this article.
Taking one of the available Charging Points from the Virtual Charging Point in test case three you would need to use your application or backend system to start a Remote Charging Session.
In the fourth and last mandatory test case, an attempted login or charging session using the wrong credentials has to be conducted in order to ensure that unauthorized users cannot start charging sessions.
Please email the filled-in test protocol to onboarding@hubject.com to schedule the live E2E test with one of our tech onboarding managers.
Once the protocol has been approved by one of our Technical Operations Managers, you will receive a link to schedule an End-to-End test. If the End-to-End Test is concluded successfully, you will move to the PROD phase after the test.