Skip to main content

What is the MeteringCheck field?

Tasmin Rüffert

The MeteringCheck field is an additional field in the Hubject platform that is provided via OICP 2.3 protocol. This field indicates if a charging session complies with the calibration law requirements established by the respective federal entity.

As CPO, what is the process to send this new field to the HBS?

This feature is only available for CPOs who are using OICP 2.3. The CPO can add the field MeteringCheck in the CalibrationLawVerificationInfo part in the CDR with the following properties:

  • This field is an ENUM, with the following predefined values:

    • Passed

    • Failed

    • Not Apply

  • The MeteringCheck is an optional field.

Field Name Values Description  M/O 
MeteringCheck

  • Passed

  • Failed

  • Not apply

This field indicates if the CDR has a charging session that complies with the national calibration law regulation of the country in which the EVSEID is located.

  • Passed: indicates if the charging session fulfills the requirement of the calibration law

  • Failed: indicates if the charging session does not fulfill the requirement of the calibration law

  • Not apply: indicates that the CPO cannot provide information or proof that the charging session is complied with the calibration law standard.

 O

 

Important for the CPO: If the MeteringCheck has the value Passed and the CDR does not contain any value in the field ConsumedEnergy, the CDR will be rejected with the status code 022 - Data Error

Related articles